Anchor Systems

As you can see from the pictures, an anchor chain or rode could shorten out and/or tangle the anchor windlass switches and/or solenoids which can cause bodily harm.
It is always recommended to have solenoids and switches covered. Always make sure that the bitter end is connected to the vessel.
It is very important to have at least one anchor ready to be dropped at any time when leaving the dock and operating vessels in coastal areas. In case of loss of any power (sail or engine) or too much power, wind, current etc. the anchor can be used to stop and or slow down the vessel for the appropriated maneuver. It is highly recommended to get proper training for this kind of life and/or material saving maneuver. (See your Yacht Club activities) Lectures - for lectures/training in your area.

It is important to have the chain/rode connection with a swivel connected to the stock. All areas need to be seized with a multiple wire at the shackle shaft (screw) so the shackle cannot unwind itself while under way or before the ‘hook’.